Semi Truck Steering and Suspension Repair, Done at Your Yard

Axle Tuners does semi truck suspension repair and steering work on-site across Dallas–Fort Worth. We replace kingpins, spring pin bushings, tie-rods and tie-rod ends, torque rods, drag links, leaf springs, shocks, air springs and U-bolts, then laser-align the truck so the fix holds. If your truck eats steer tires, pulls, or clunks over every bump, a worn part is often the real cause, not just the alignment.

Fixed on-site, then aligned

The real reason tires wear out

Why Semi Truck Suspension Repair Comes Before the Alignment

An alignment sets the angles of your wheels. However, worn steering and suspension parts let those angles move. A loose kingpin lets the wheel shift under load. Worn spring pin bushings let the axle walk, so the rear of the truck starts steering the front. Meanwhile, a worn tie-rod end changes toe every time you hit a bump.

So a truck with loose parts can read perfect in the yard and drift back out on the highway. That’s how owners end up buying new steer tires and paying for an alignment, only to see the same wear a few months later.

That’s why we check first. Every visit starts with a 30 to 50+ point steering, suspension, tire and axle inspection. If something is worn, we show you and quote the repair before we touch it. Worn steering parts can also fail a DOT inspection, since federal rules limit steering wheel lash and loose steering parts (49 CFR 393.209).

Spring pin and bushing area on a truck suspension
What we repair

Steering and Suspension Repairs We Do on Site

Published prices for the most common front-end jobs. Parts vary by axle and make, so we quote them after the inspection, and you approve the total first.

Kingpins

Worn kingpins cause wander, shimmy and edge wear on steer tires. We press out the old pins and bushings, fit new ones, and set the end play. See kingpin replacement.

Spring pins and bushings

Worn spring pin bushings let the axle shift, which causes a harsh ride, clunks over bumps and a truck that dog-tracks.

Tie-rods and tie-rod ends

A loose tie-rod end or bent tie-rod throws off toe, the main cause of feathered steer tires.

More Suspension and Steering Parts We Replace

These depend on the truck and the part, so we price them after the inspection. As always, you approve the quote before we start.

  • Torque rods

    They keep the drive axles square to the frame. Worn torque rod bushings cause axle walk, wheel hop and scrubbed drive tires.

    Quoted after inspection
  • Drag links

    The drag link connects the steering gear to the front axle. Worn ends add play and make the truck wander.

    Quoted after inspection
  • Leaf springs

    Cracked, broken or sagging leaves change ride height and axle position, which leads to pulling and uneven wear.

    Quoted after inspection
  • Shocks

    Worn shocks let the axle bounce, which cups tires and makes every bump hit harder.

    Quoted after inspection
  • Air springs (air bags)

    A leaking or damaged air spring drops ride height and loads the suspension unevenly.

    Quoted after inspection
  • U-bolts

    U-bolts clamp the axle to the springs. Loose or broken U-bolts let the axle shift, so we never leave them for later.

    Quoted after inspection
  • Trailer spring bushings

    Worn trailer spring bushings let the axles move, which causes dog-tracking and tire scrub.

    Quoted after inspection
Uneven tread wear on trailer tires, a common sign of axle misalignment
Warning signs

Signs Your Front End Needs Work

Catch these early and the repair is usually a few parts. Wait, and it’s often a set of steer tires too.

Repair and Alignment in One Visit

Other shops often fix the parts and send you somewhere else to get it aligned. Instead, we do both where the truck is parked, so it’s down once, not twice.

1. Inspect

30 to 50+ point steering, suspension, tire and axle check at your yard.

2. Quote

We show you what’s worn and price it. Nothing happens without your OK.

3. Repair

Kingpins, bushings, tie-rods, torque rods, springs, shocks and more, replaced on-site.

4. Align

Laser alignment after the repair, so the fix holds.

Semi Truck Suspension Repair Questions

Watch for steer tires wearing on one edge, a truck that pulls or wanders, an off-center steering wheel, clunks over bumps, or play in the steering. Our 30 to 50+ point inspection finds the worn part and we quote it before any work.

Only if the steering and suspension parts are tight. If a kingpin, bushing or tie-rod end is worn, the alignment won’t hold and the wear comes back. That’s why we inspect first and fix worn parts before we align.

Kingpin replacement is $1,199 plus parts per axle. Spring pin bushings are $752 plus parts per axle, and a tie-rod or tie-rod end is $188 plus parts.

Besides kingpins, spring pin bushings, tie-rods and tie-rod ends, we replace torque rods, drag links, leaf springs, shocks, air springs, U-bolts and trailer spring bushings. We price those after the inspection, and you approve the quote first.

Yes. We fix the worn parts and then laser-align the truck while we’re there, so it only comes out of service once.

Yes. We work across Dallas–Fort Worth at your yard, shop or fleet lot, Monday to Friday, 8 a.m. to 5 p.m. Tire and diesel shops can also sublet front-end and alignment work to us.

Get your truck tracking straight

Stop Buying Tires to Fix a Front-End Problem

Tell us where the unit is and what it’s doing. We’ll call you back to set a time, Monday to Friday, 8 a.m. to 5 p.m.

See every price on our pricing page, or call and we’ll talk it through on the phone.

Request Service

Tell us where the unit is and what it needs. We’ll call you to set a time.

Text messages
Optional. Msg & data rates may apply. Msg frequency varies. Reply STOP to opt out, HELP for help. See our Privacy Policy and Terms.

Your data is used by Axle Tuners LLC and affiliates only.