Axle Spindle Replacement, Done On-Site
Axle Tuners does trailer and drive axle spindle replacement at your yard or shop across Dallas–Fort Worth and beyond (travel rates apply beyond 20 miles). Trailer spindle replacement starts at $1,388 for the bare spindle. Add a Hub-Kit, which includes every part needed to reassemble the hub and extends the spindle warranty to 5 years. Drive spindles start at $1,488, and a Hub-Kit extends that warranty to 5 years as well. We install every spindle with a laser-guided jig and special welding procedures, so the spindle sits in 360-degree alignment with the axle. That eliminates the common issues seen with competitors’ spindles.
Spindle replacement
- Trailer spindles: from $1,388
- Drive spindles: from $1,488
- Hub-Kit with 5-year spindle warranty: from $479
- Laser-guided jig installation
- OE supply-chain sourced parts, whenever available
Spindle vs. new axle
Why Axle Spindle Replacement Beats a New Axle
Spindle damage can come from many things: a seal leak that leads to oil starvation, heavy loads over time, an over-tightened spindle nut, a nut that backed off, or sudden bearing failure. Once the bearing race can no longer hold the bearings in place, it is only a matter of time before total failure leaves your rig on the roadside. Some shops will tell you the only options are a franchised spindle service or a whole new axle. With either, you are often looking at days or weeks of downtime, and a new axle with installation can run $5,000 to $7,000 or more.
Now you have a fast, safe, and reliable third option that restores the wheel end of your axle to as-new. We cut off the damaged spindle and install a new, OE supply-chain sourced one using a laser-guided jig, careful temperature control so we don’t weaken the axle, and proprietary procedures that create a weld as strong as the components it holds together. As a result, your bearings, brakes and tires aren’t fighting a crooked spindle.
We use OE-source spindles whenever available. When there’s no OE source for your axle, we custom-fabricate one. Either way, you get the price before we start.
Before: a worn trailer spindle with a scored bearing surface. After: the new spindle installed on-site with the laser-guided jig.
Upfront pricing
Axle Spindle Replacement Prices
Prices for the bare spindle replacement, done on-site. Hub-Kits, tear-down and reassembly are added on request.
- Trailer spindle replacementFrom $1,388
- Drive spindle replacementFrom $1,488
- Hub-Kit (5-year spindle warranty)From $479
- Brake spider plates$888
Included with every job
- Laser-guided jig installation
- Proprietary multi-pass welding
- OE supply-chain sourced spindles, whenever available
- Price quoted before we start
How We Replace a Spindle
The whole job happens where the truck or trailer is parked.
1. Inspect
We confirm the spindle damage and check the axle and wheel end.
2. Remove & prepare
After cutting off the damaged spindle, we prep the axle so the new spindle seats on a clean, true surface.
3. Fit with jig
A special jig holds the spindle in the correct X, Y and Z position, while the technician verifies and corrects it with a laser guide.
4. Weld & finish
A proprietary multi-pass weld by expert welders, not someone who took a one-day class. We finish with a top cap and an inspection to our standards.
Warning signs
Signs of a Bad or Failing Spindle
Unfortunately, many wait until it is far too late to address signs that could have prevented a failed spindle or limited the damage. Here’s how to catch it early.
- Use a Go/No-Go gauge, available from Axle Tuners, any time the wheel end is apart to verify the spindle is still in spec, especially if bearings are damaged or show overheating
- Look for any sign the bearing has spun where the race meets the axle
- Never keep driving with a blown wheel seal or any other sign the wheel end isn't lubricated
- Wheel seals keep failing on the same position
- Hub temperature after 1 to 2 hours of driving runs above normal
Axle Spindle Replacement Questions
How much does axle spindle replacement cost?
Trailer spindles start at $1,388 and drive spindles at $1,488. That price is for the bare spindle replacement: the wheel end is torn down to the spindle when we arrive, and someone else reassembles it after it cools to a safe temperature a few hours after we leave. We recommend adding the matching Hub-Kit, which extends the spindle warranty to 5 years. Need tear-down or reassembly too? Call us for a quote on the whole job.
Do I need a new axle if the spindle is damaged?
Usually not. We replace just the spindle, which saves the cost and downtime of a whole new axle.
Are your spindles OE parts?
We use OE supply-chain sourced spindles whenever available. When no OE source exists for your axle, we custom-fabricate one.
Why does the laser-guided jig matter?
To install a spindle without hurting brake function, tire wear, bearing life or wheel-end life, it has to go in with absolute precision. The jig holds the spindle in the correct X, Y and Z position, while the technician makes micro-adjustments and verifies the axle tube isn’t bent using a laser guide. It isn’t rocket science, but it is what lets us do exceptional spindle installations.
Can you do it at my yard?
Maybe. Spindle installations have to be done at least 20 feet from flammable materials, and in bad weather only in a protected space such as inside a shop, out of the wind, extreme cold and rain. Call us and we’ll work out the best time and place for your installation.
Get on the schedule
Get a Spindle Replaced Without Buying an Axle
Tell us where the unit is and what it needs. We’ll call you back to set a time, Monday to Friday, 8 a.m. to 5 p.m.
See every price on our pricing page, or call and we’ll talk it through.
Request Service
Tell us where the unit is and what it needs. We’ll call you to set a time.
Your data is used by Axle Tuners LLC and affiliates only.
