Kingpin Replacement at Your Yard
Axle Tuners replaces kingpins on-site across Dallas–Fort Worth from $1,199 plus parts per axle, and that includes aligning the front end.
Kingpins are a job you do not want to entrust to just any shop. Do it wrong and you’ll be buying another set in 6 to 12 months, often with extra damage to fix. Improperly installed kingpins can damage the steering knuckles and the axle eye, which can cost thousands a few months later. Our techs have the training and equipment for any kingpin job, including the ones that follow a shop that didn’t do it right last time. For straightforward jobs we typically use a STEMCO Kaiser Plus Kit, a big step up from the bargain kits on the market. Axle Tuners does kingpin replacement on-site across Dallas–Fort Worth from $1,199 plus parts per axle, and that includes properly aligning the front end, a step many shops skip or charge extra for somewhere else. Worn kingpins make a truck handle poorly, wander, shimmy, and rapidly wear steer tires.
Kingpin replacement
- From $1,199 + parts per axle
- Steer axle alignment included
- Upgrade to a full 3-axle alignment for $176 more
- STEMCO Kaiser Plus Kit on standard jobs
- Done at your yard or shop
Why kingpins matter
What Worn Kingpins Do to Your Truck
Steering kingpins are what let your steer axle wheels turn. They bear incredible forces from every vibration, bump and impact the road throws at the wheels and tires. Improper and infrequent greasing is the number one killer of kingpins and kingpin bushings. Once the pins have too much play in their bushings, they can no longer hold proper steer axle alignment geometry, which leads to rapid tire wear and other issues.
Because worn kingpins can’t hold a stable geometry, they make any attempt at a wheel alignment useless. That’s why we check them on every alignment, and why we align the truck after every kingpin replacement.
In addition, loose steering and suspension parts can fail a DOT inspection. Our annual DOT inspection can often be done on the same visit.
Warning signs
Signs You May Need Kingpins
You can’t always tell from driving or a pre-trip inspection when kingpins start to fail, which is one reason an annual alignment matters. Some signs:
- Abnormal, sometimes sudden tire wear
- Turning the steering wheel has become increasingly difficult
- The truck routinely weighs in at or near the maximum rating for the front axle
- The truck works in extreme conditions, such as bad roads or off-road, like many construction and refuse trucks
- More than 400,000 miles with average to poor preventive maintenance, or more than 500,000 miles even with excellent maintenance
- Steer tires wear noticeably in just a few trips despite a recent alignment
- The truck goes through steer tires far faster than when it was new
Upfront pricing
Kingpin Replacement Price
From $1,199 per axle plus parts, and that includes the steer axle alignment. Seized parts or hidden damage are priced after the inspection, and you approve the total first.
Included with every job
- Steer axle alignment after the repair
- STEMCO Kaiser Plus Kit on standard jobs
- Parts quoted before work starts
- Work done at your yard or shop
How Kingpin Replacement Works
We fix it and align it where the truck is parked, so it’s down once.
1. Inspect
We confirm whether the kingpins actually need replacing. You’d be surprised how often other shops misdiagnose this.
2. Quote
You get an estimate before we start. Seized parts or hidden damage may raise the cost, but we’re upfront and show you what we find.
3. Remove, evaluate & replace
We remove the worn parts, check the axle eye and knuckle bores for damage, then install new bushings (and sleeves if needed) with the proper equipment so nothing fails months later.
4. Reassemble & align
We assemble and grease every component, then align the front end so the repair performs.
Kingpin Replacement Questions
How much does kingpin replacement cost?
Kingpin replacement starts at $1,199 plus parts per axle, and that includes the steer axle alignment. A full 3-axle alignment is $176 more. Seized kingpins ($250 to $500+ each to remove) and damaged axle eyes or knuckle ends (re-sleeved from $500 per sleeve) are quoted after the inspection, and you approve the total first.
How do I know if my kingpins are worn?
You can’t always tell from driving. Watch for sudden or abnormal steer tire wear, steering that keeps getting harder, tires wearing fast despite a recent alignment, and high mileage or heavy front axle loads. We check kingpin play on every alignment and confirm whether they really need replacing.
Do I need an alignment after a kingpin replacement?
Yes, and ours includes it. New kingpins change how the wheels sit, so we align the steer axle after the repair, or the full truck for $176 more.
Can you replace kingpins at my yard?
Yes. We replace kingpins on-site across Dallas–Fort Worth, Monday to Friday, 8 a.m. to 5 p.m.
Do you work with repair shops?
Yes. Fleet and shop managers without the equipment can sublet kingpin and alignment work to us, and they keep the customer.
Get on the schedule
Tighten Up a Loose Front End
Tell us where the unit is and what it needs. We’ll call you back to set a time, Monday to Friday, 8 a.m. to 5 p.m.
See every price on our pricing page, or call and we’ll talk it through.
Request Service
Tell us where the unit is and what it needs. We’ll call you to set a time.
Your data is used by Axle Tuners LLC and affiliates only.
