Mobile Truck Alignment in Dallas, TX
Need a truck alignment in Dallas without losing a day to a shop bay? Axle Tuners brings laser-guided alignment, axle, spindle, and kingpin repair to your yard, shop, or fleet lot. A 3-axle alignment is $325, and every job starts with a 30 to 50+ point inspection.
Mobile service across Dallas
Done at your Dallas location
- 3-axle and 2-axle alignments
- Trailer axle squaring
- Spindle and kingpin replacement
- Spring pin bushings and tie-rods
- Annual DOT inspections
Where we work
Truck Alignment Across the Dallas Freight Map
Dallas is a big city to cross with a truck that pulls. With about 1.33 million residents, it is the ninth-largest city in the country, and its freeway grid carries freight in every direction. So instead of routing a worn truck through that traffic to a shop, we drive to it.
Dallas freight clusters in a few zones. First, there are the older warehouse blocks of the Stemmons Corridor and Brookhollow, along I-35E near Regal Row and Irving Boulevard. Next, there is the southern Dallas side of the Southern Dallas County Inland Port, the logistics district south of I-20 between I-35E and I-45. Finally, there are the fleet yards spread along I-30 and the LBJ Freeway.
- Stemmons Corridor and Brookhollow, along I-35E
- Inland Port district, south of I-20
- I-30 and I-635 (LBJ) fleet yards
- Shops and yards along I-20 in southern Dallas
Upfront prices
Dallas Truck Alignment and Axle Repair Prices
We publish our prices, so you know the cost before we roll out. Click any line to read more about that job. Also, lines marked plus parts add the part cost, and we price any extra repair before we start it.
- 3-axle alignment, heavy duty$325
- 2-axle alignment, medium duty$250
- Caster adjustment$58
- Heavy-duty spindlesFrom $1,388
- Kingpin replacement, per axle$1,199 + parts
- Spring pin bushings, per axle$752 + parts
- DOT inspection$188
Why Dallas Fleets Skip the Shop Wait
A truck out of alignment scrubs its steer tires every mile. Meanwhile, it pulls, wanders, and burns extra fuel. In stop-and-go Dallas traffic, that wear adds up fast. As a result, a $325 alignment is cheap next to a $4,000+ set of tires.
A shop visit, however, has its own cost. Your driver books a bay, waits, and loses part of a shift. With us, the truck stays parked while we work. First, we look the truck over. Next, we price what we find, and we repair only what you sign off on.
Tire and diesel shops can sublet Dallas alignment jobs to us as well. So if your shop has no rack, send the work our way and hold on to the account.
Questions From Dallas Truck Owners
Do you cover all of Dallas?
Yes. We work across the city, from the Stemmons Corridor and Brookhollow to the Inland Port district south of I-20, as long as the truck is parked at a yard, shop, or fleet lot.
Do I need to bring my truck to a shop?
No. We are a mobile service, so we bring the alignment equipment to the truck. That means no towing and no waiting for a bay.
How much is a semi truck alignment in Dallas?
A 3-axle heavy-duty alignment is $325 and a 2-axle medium-duty alignment is $250. Caster adjustment is $58. Every alignment includes a 30 to 50+ point steering, suspension, tire, and axle inspection.
Can you replace a trailer spindle on-site?
Yes. Heavy-duty spindle replacement starts at $1,388. Each one goes in with a laser-guided jig, and OE-source spindles are used when available.
Can you do my annual DOT inspection at the yard?
Yes. An annual DOT inspection is $188, done at your location. We can also fix many of the steering and suspension items an inspection turns up.
Recent jobs
Recent Truck Repair Jobs in Dallas
Jobs our techs finished in Dallas, with photos and the work we did. Locations are approximate to protect our clients.
Nearby Cities We Serve
We also work in the cities around Dallas. See our full service area for the complete list.
Get a Truck Alignment in Dallas Today
Call us, tell us where the truck is parked, and we will set a time. Hours are Monday to Friday, 8 a.m. to 5 p.m.



