Semi Truck Alignment Cost and Repair Prices
With Axle Tuners, the semi truck alignment cost is $325 for a heavy-duty 3-axle truck and $250 for a 2-axle medium-duty truck. We do the work at your yard, shop, or fleet lot anywhere in Dallas–Fort Worth, so there is no tow and no wait for a shop bay. Below you’ll find every price we publish, from spindles and kingpins to DOT inspections.
Full price list
Truck and Trailer Repair Prices
These are our standard prices for work done on-site. Parts are extra only where the price says “+ parts.” Tap any line to see how we do that job.
Alignments
- 3-axle alignment, heavy duty$325
- 2-axle alignment, medium duty$250
- Trailer alignment$225 + hardware
- Additional axles, each$88
- Caster adjustment$58
Every alignment includes a 30 to 50+ point steering, suspension, tire and axle inspection.
Axles & Spindles
- Heavy-duty spindlesFrom $1,388
- Hub-Kit, 5-year spindle warrantyFrom $479
- Trailing-arm bushing housingsFrom $1,200
- Spider plates$888
- Axle eye boring & sleeving$599–$999
OE-source spindles are used when available.
Steering & Suspension
- Kingpins, per axle, steer alignment includedFrom $1,199 + parts
- Spring pin bushings, per axle$752 + parts
- Tie-rod or tie-rod end$188 + parts
- Steering wheel centeringFrom $47
Torque rods, drag links, springs, shocks, air springs and U-bolts are quoted after inspection.
Add-Ons & Other
Standard prices cover our normal 20-mile service radius.*
What you get
What Every Price Includes
A low number means little if the job gets padded later. So here is what comes with every visit, before any extra repair is even discussed.
- We drive to your yard, shop, or fleet lot. No tow bill and no shop-bay wait.
- Every alignment starts with a 30 to 50+ point steering, suspension, tire, and axle inspection.
- Laser-guided alignment equipment, and a laser-guided jig for spindle installs.
- If we find worn parts, we quote the repair first. You approve it before we touch it.
- Standard prices are published right here, so you know before you call.
What Changes Your Semi Truck Alignment Cost
Most trucks pay the flat price and nothing more. However, a few things can add to the bill, and we tell you about each one up front.
Number of axles
A heavy-duty 3-axle tractor is $325. A 2-axle medium-duty truck is $250, with 2-axle alignments ranging from $225 to $275 by model. Additional axles are $88 each, and a trailer alignment is $225, plus hardware if needed.
Caster correction
If the caster angle is out of spec, correcting it adds $58. A truck that wanders or won’t return to center often needs it.
Worn parts
Loose kingpins, tie-rod ends, or bushings stop an alignment from holding. We show you the wear and price the fix first.
Steering wheel centering is available from $47. Also, if steer tires already show feathering or cupping, an alignment stops further wear, but it cannot undo what’s gone. For more on the work itself, see our mobile truck alignment page.
Spindles, axles, kingpins
Why Our Spindle and Axle Prices Are Published
A damaged spindle often means a replaced axle at other shops. Instead, we cut off the bad spindle and install a new one with a laser-guided jig, right at your location. OE-source spindles are used when available.
Because the process is the same every time, the price is published: heavy-duty spindles start at $1,388, and trailing-arm bushing housings start at $1,200. Read more about axle spindle replacement, kingpin replacement, and truck axle repair.
Semi Truck Alignment Cost and Pricing FAQ
How much does a semi truck alignment cost?
At Axle Tuners, a heavy-duty 3-axle alignment is $325 and a 2-axle medium-duty alignment is $250. We do it at your location in Dallas–Fort Worth, and every alignment includes a 30 to 50+ point inspection.
Do your prices include parts?
Alignment, spindle, spider plate, axle eye, and DOT inspection prices are the price for the standard job. Kingpins, spring pin bushings, and tie-rod work list a labor price plus parts, because parts vary by axle and make. Jobs outside our normal 20-mile service radius may include a trip fee, and hidden damage found during a job may add parts or labor.
How much does it cost to replace a trailer axle spindle?
Heavy-duty spindle replacement starts at $1,388, installed on-site with a laser-guided jig. OE-source spindles are used when available.
How much is an annual DOT inspection?
An annual DOT inspection is $188. We can do it on the same visit as an alignment or repair.
Will I know the price before you start?
Yes. You see the published price before we come out. If the inspection turns up worn parts, we quote that repair and wait for your OK before doing it.
How often should a semi truck be aligned?
Fleets with the best-managed tire budgets check alignment every 70,000 miles or one year, whichever comes first. Also check it any time steer tires wear unevenly, the truck pulls or wanders, or after steering or suspension work. Special rates are available for 4 or more trucks.
Get on the schedule
Ready for a Price on Your Truck?
Tell us where the unit is and what it needs. We’ll call you back to confirm the price and set a time, Monday to Friday, 8 a.m. to 5 p.m.
We can also do the annual inspection required by 49 CFR 396.17 on the same visit. Rather talk now? Call us and we’ll quote it on the phone.
Request Service
Tell us where the unit is and what it needs. We’ll call you to set a time.
Your data is used by Axle Tuners LLC and affiliates only.
