Semi Truck Steering and Suspension Repair, Done at Your Yard
Axle Tuners does semi truck suspension repair and steering work on-site across Dallas–Fort Worth. We replace kingpins, spring pin bushings, tie-rods and tie-rod ends, torque rods, drag links, leaf springs, shocks, air springs and U-bolts, then laser-align the truck so the fix holds. If your truck eats steer tires, pulls, or clunks over every bump, a worn part is often the real cause, not just the alignment.
Fixed on-site, then aligned
- Kingpins: $1,199 + parts per axle
- Spring pin bushings: $752 + parts per axle
- Tie-rod or tie-rod end: $188 + parts
- Caster correction: $58
- Torque rods, leaf springs, shocks & more: quoted on-site
- 30 to 50+ point inspection before any repair
The real reason tires wear out
Why Semi Truck Suspension Repair Comes Before the Alignment
An alignment sets the angles of your wheels. However, worn steering and suspension parts let those angles move. A loose kingpin lets the wheel shift under load. Worn spring pin bushings let the axle walk, so the rear of the truck starts steering the front. Meanwhile, a worn tie-rod end changes toe every time you hit a bump.
So a truck with loose parts can read perfect in the yard and drift back out on the highway. That’s how owners end up buying new steer tires and paying for an alignment, only to see the same wear a few months later.
That’s why we check first. Every visit starts with a 30 to 50+ point steering, suspension, tire and axle inspection. If something is worn, we show you and quote the repair before we touch it. Worn steering parts can also fail a DOT inspection, since federal rules limit steering wheel lash and loose steering parts (49 CFR 393.209).
What we repair
Steering and Suspension Repairs We Do on Site
Published prices for the most common front-end jobs. Parts vary by axle and make, so we quote them after the inspection, and you approve the total first.
- Kingpin replacement, per axle$1,199 + parts
- Spring pin bushings, per axle$752 + parts
- Tie-rod or tie-rod end$188 + parts
- Caster correction$58
- 3-axle alignment after repair$325
- 2-axle alignment after repair$225
Kingpins
Worn kingpins cause wander, shimmy and edge wear on steer tires. We press out the old pins and bushings, fit new ones, and set the end play. See kingpin replacement.
Spring pins and bushings
Worn spring pin bushings let the axle shift, which causes a harsh ride, clunks over bumps and a truck that dog-tracks.
Tie-rods and tie-rod ends
A loose tie-rod end or bent tie-rod throws off toe, the main cause of feathered steer tires.
More Suspension and Steering Parts We Replace
These depend on the truck and the part, so we price them after the inspection. As always, you approve the quote before we start.
Torque rods
They keep the drive axles square to the frame. Worn torque rod bushings cause axle walk, wheel hop and scrubbed drive tires.
Quoted after inspectionDrag links
The drag link connects the steering gear to the front axle. Worn ends add play and make the truck wander.
Quoted after inspectionLeaf springs
Cracked, broken or sagging leaves change ride height and axle position, which leads to pulling and uneven wear.
Quoted after inspectionShocks
Worn shocks let the axle bounce, which cups tires and makes every bump hit harder.
Quoted after inspectionAir springs (air bags)
A leaking or damaged air spring drops ride height and loads the suspension unevenly.
Quoted after inspectionU-bolts
U-bolts clamp the axle to the springs. Loose or broken U-bolts let the axle shift, so we never leave them for later.
Quoted after inspectionTrailer spring bushings
Worn trailer spring bushings let the axles move, which causes dog-tracking and tire scrub.
Quoted after inspection
Warning signs
Signs Your Front End Needs Work
Catch these early and the repair is usually a few parts. Wait, and it’s often a set of steer tires too.
- Steer tires feathered, cupped, or worn on one edge
- Truck pulls, wanders, or needs constant correction
- Steering wheel off center when driving straight
- Clunks over bumps, or a ride that hits like a hammer
- Play in the steering or a shimmy at speed
- New tires wearing out fast after a recent alignment
Repair and Alignment in One Visit
Other shops often fix the parts and send you somewhere else to get it aligned. Instead, we do both where the truck is parked, so it’s down once, not twice.
1. Inspect
30 to 50+ point steering, suspension, tire and axle check at your yard.
2. Quote
We show you what’s worn and price it. Nothing happens without your OK.
3. Repair
Kingpins, bushings, tie-rods, torque rods, springs, shocks and more, replaced on-site.
4. Align
Laser alignment after the repair, so the fix holds.
Semi Truck Suspension Repair Questions
How do I know if my semi truck needs suspension repair?
Watch for steer tires wearing on one edge, a truck that pulls or wanders, an off-center steering wheel, clunks over bumps, or play in the steering. Our 30 to 50+ point inspection finds the worn part and we quote it before any work.
Will an alignment fix uneven tire wear?
Only if the steering and suspension parts are tight. If a kingpin, bushing or tie-rod end is worn, the alignment won’t hold and the wear comes back. That’s why we inspect first and fix worn parts before we align.
How much does kingpin replacement cost?
Kingpin replacement is $1,199 plus parts per axle. Spring pin bushings are $752 plus parts per axle, and a tie-rod or tie-rod end is $188 plus parts.
What other suspension parts do you replace?
Besides kingpins, spring pin bushings, tie-rods and tie-rod ends, we replace torque rods, drag links, leaf springs, shocks, air springs, U-bolts and trailer spring bushings. We price those after the inspection, and you approve the quote first.
Can you do the repair and the alignment on the same visit?
Yes. We fix the worn parts and then laser-align the truck while we’re there, so it only comes out of service once.
Do you come to my yard or shop?
Yes. We work across Dallas–Fort Worth at your yard, shop or fleet lot, Monday to Friday, 8 a.m. to 5 p.m. Tire and diesel shops can also sublet front-end and alignment work to us.
Get your truck tracking straight
Stop Buying Tires to Fix a Front-End Problem
Tell us where the unit is and what it’s doing. We’ll call you back to set a time, Monday to Friday, 8 a.m. to 5 p.m.
See every price on our pricing page, or call and we’ll talk it through on the phone.
Request Service
Tell us where the unit is and what it needs. We’ll call you to set a time.
Your data is used by Axle Tuners LLC and affiliates only.
