Axle Spindle Replacement, Done On-Site

Axle Tuners does trailer and drive axle spindle replacement at your yard or shop across Dallas–Fort Worth and beyond (travel rates apply beyond 20 miles). Trailer spindle replacement starts at $1,388 for the bare spindle. Add a Hub-Kit, which includes every part needed to reassemble the hub and extends the spindle warranty to 5 years. Drive spindles start at $1,488, and a Hub-Kit extends that warranty to 5 years as well. We install every spindle with a laser-guided jig and special welding procedures, so the spindle sits in 360-degree alignment with the axle. That eliminates the common issues seen with competitors’ spindles.

Spindle replacement

Spindle vs. new axle

Why Axle Spindle Replacement Beats a New Axle

Spindle damage can come from many things: a seal leak that leads to oil starvation, heavy loads over time, an over-tightened spindle nut, a nut that backed off, or sudden bearing failure. Once the bearing race can no longer hold the bearings in place, it is only a matter of time before total failure leaves your rig on the roadside. Some shops will tell you the only options are a franchised spindle service or a whole new axle. With either, you are often looking at days or weeks of downtime, and a new axle with installation can run $5,000 to $7,000 or more.

Now you have a fast, safe, and reliable third option that restores the wheel end of your axle to as-new. We cut off the damaged spindle and install a new, OE supply-chain sourced one using a laser-guided jig, careful temperature control so we don’t weaken the axle, and proprietary procedures that create a weld as strong as the components it holds together. As a result, your bearings, brakes and tires aren’t fighting a crooked spindle.

We use OE-source spindles whenever available. When there’s no OE source for your axle, we custom-fabricate one. Either way, you get the price before we start.

Axle spindle replacement before and after: worn trailer spindle, then the new spindle installed on-site

Before: a worn trailer spindle with a scored bearing surface. After: the new spindle installed on-site with the laser-guided jig.

Upfront pricing

Axle Spindle Replacement Prices

Prices for the bare spindle replacement, done on-site. Hub-Kits, tear-down and reassembly are added on request.

Included with every job

How We Replace a Spindle

The whole job happens where the truck or trailer is parked.

1. Inspect

We confirm the spindle damage and check the axle and wheel end.

2. Remove & prepare

After cutting off the damaged spindle, we prep the axle so the new spindle seats on a clean, true surface.

3. Fit with jig

A special jig holds the spindle in the correct X, Y and Z position, while the technician verifies and corrects it with a laser guide.

4. Weld & finish

A proprietary multi-pass weld by expert welders, not someone who took a one-day class. We finish with a top cap and an inspection to our standards.

Damaged spindle with a worn bearing surface
Warning signs

Signs of a Bad or Failing Spindle

Unfortunately, many wait until it is far too late to address signs that could have prevented a failed spindle or limited the damage. Here’s how to catch it early.

Axle Spindle Replacement Questions

Trailer spindles start at $1,388 and drive spindles at $1,488. That price is for the bare spindle replacement: the wheel end is torn down to the spindle when we arrive, and someone else reassembles it after it cools to a safe temperature a few hours after we leave. We recommend adding the matching Hub-Kit, which extends the spindle warranty to 5 years. Need tear-down or reassembly too? Call us for a quote on the whole job.

Usually not. We replace just the spindle, which saves the cost and downtime of a whole new axle.

We use OE supply-chain sourced spindles whenever available. When no OE source exists for your axle, we custom-fabricate one.

To install a spindle without hurting brake function, tire wear, bearing life or wheel-end life, it has to go in with absolute precision. The jig holds the spindle in the correct X, Y and Z position, while the technician makes micro-adjustments and verifies the axle tube isn’t bent using a laser guide. It isn’t rocket science, but it is what lets us do exceptional spindle installations.

Maybe. Spindle installations have to be done at least 20 feet from flammable materials, and in bad weather only in a protected space such as inside a shop, out of the wind, extreme cold and rain. Call us and we’ll work out the best time and place for your installation.

Related Services

Get on the schedule

Get a Spindle Replaced Without Buying an Axle

Tell us where the unit is and what it needs. We’ll call you back to set a time, Monday to Friday, 8 a.m. to 5 p.m.

See every price on our pricing page, or call and we’ll talk it through.

Request Service

Tell us where the unit is and what it needs. We’ll call you to set a time.

Text messages
Optional. Msg & data rates may apply. Msg frequency varies. Reply STOP to opt out, HELP for help. See our Privacy Policy and Terms.

Your data is used by Axle Tuners LLC and affiliates only.