Truck Alignment at Your Coppell Dock

Coppell runs on distribution, and Axle Tuners brings truck alignment to Coppell docks so trucks keep moving. We set up laser-guided equipment at your yard, shop, or fleet lot. Then we inspect the whole front end before we leave.

Coppell · Northeast corner of DFW Airport
Freight on the airport’s edge

Coppell Truck Alignment for Distribution Fleets

Coppell is a city of about 41,000 people at the northeast corner of DFW Airport. In fact, about 266 acres of airport land fall inside the city. Still, no freeway runs straight through Coppell. Instead, SH 121 wraps the west and north edges, and I-635 runs along the south. Meanwhile, the George Bush Turnpike and I-35E serve the east side.

Much of the freight, however, sits in southwest Coppell. Amazon, Uline, The Container Store, and Mohawk Industries all have shipping or distribution sites there. For example, Amazon picked Coppell in 2013 for a fulfillment center of about 1 million square feet, as developer Hillwood announced. It then added a second center on West Bethel Road in 2016.

Prologis also has big parks here. Prologis Park 121 covers about 1.4 million square feet on 110 acres at SH 121 and Freeport Parkway. In addition, the Freeport Corporate Center has buildings on South Royal Lane near I-635.

Heavy pump truck set up for a wheel alignment

Busy Docks, Short Turns, Worn Tires

Trucks at a big distribution center rarely go far between turns. Instead, they pull through gates, swing into doors, and back under trailers all shift long. Because of that, the front end takes steady abuse. Once the toe or caster slips, the steer tires start to scrub.

That wear gets expensive fast. Scrubbed steer tires come off the truck early, and a front end that fights the road burns extra fuel. So the alignment is the cheaper fix by a wide margin, especially when we catch the problem early.

We also look past the alignment. In fact, every visit includes a 30 to 50+ point inspection. If a spindle is damaged, we install the new one with a laser-guided jig, using the OE-source part when one is still made. Our axle spindle replacement page has the details.

Coppell pricing

Truck Alignment and Repair Prices in Coppell

All prices are for work done at your Coppell location. We list them up front, and we quote any extra repair before we begin. Also, DOT inspections can be done on the same visit.

Recent jobs

Recent Truck Repair Jobs in Coppell

Jobs our techs finished in Coppell, with photos and the work we did. Locations are approximate to protect our clients.

Cities Around Coppell

Coppell borders Grapevine, Lewisville, Carrollton, Irving, and Dallas. We also serve each of them.

Coppell Truck Alignment FAQ

Yes, with the property’s permission. We bring everything to the truck and work beside it, so it can stay close to its door.

Yes. We work at yards and warehouses along South Royal Lane, Freeport Parkway, and Bethel Road, as well as the rest of Coppell.

Yes. We service Class 5 to 8 trucks, including box trucks. A 2-axle medium-duty alignment is $250, and it includes the same 30 to 50+ point inspection.

Yes. We replace tie-rods and tie-rod ends at your location. First we show you the damage, and then we quote the part before we install it.

Any weekday works. Call with your address and the number of trucks, and then we will pick a time.

Set Up Truck Alignment in Coppell

Call us with the building and the truck count. Then we will meet you at the dock.