Truck and Trailer Alignment in Wilmer, TX
Wilmer is small, but its warehouses are huge, and they keep a lot of trailers moving. So Axle Tuners does truck alignment in Wilmer right at the dock or yard. We bring laser-guided equipment for tractors and trailers alike, and every job also starts with a 30 to 50+ point inspection.
Wilmer, TX · I-45 south of Dallas
Distribution country
Truck Alignment Near Wilmer's Distribution Centers
Wilmer counts only about 6,800 residents, and it lies some 14 miles south of downtown Dallas. Even so, the town is home to several distribution centers of close to a million square feet or more. Much of that growth started when Union Pacific chose Wilmer for its Dallas Intermodal Terminal, a 360-acre rail yard on I-45 that sits partly inside Wilmer’s city limits.
Shippers soon followed the railroad. According to the Wilmer EDC, Unilever, Procter & Gamble, Whirlpool, Ace Hardware, and Medline all came to town. For example, Ace Hardware’s distribution center grew from about 450,000 to more than 900,000 square feet. Medline also opened an 800,000-square-foot center in Sunridge Business Park in 2017.
Still, the newest space is just as big. At Southport Logistics Park, about a mile east of I-45, CJ Logistics America leased a 1.08-million-square-foot building in late 2024.
- Southport Logistics Park
- Sunridge Business Park at Medline Drive
- Interpoint Distribution Center, across I-45 from the rail yard
- Yards off I-45 Exits 269, 270, and 271
Trailers Do the Heavy Lifting in Wilmer
Distribution centers run on trailers. They sit at the dock, get pulled across the yard, and then head out on I-45 or I-20. However, a trailer with its axles out of square drags its tires the whole way. It also pushes the tractor off line, so the driver fights the wheel.
That is why our trailer alignment puts the axles back in square right in the yard. In addition, we replace damaged trailer spindles on-site with a laser-guided jig. Our first choice is always the OE-source part, as long as it is still made.
Tractors get the same care, especially on the steer axle. A tractor that is out of spec scrubs its steer tires and drags on every mile of I-45, which burns fuel. So if your yard tractors or road trucks wear tires unevenly, a quick check pays off.
Rates
Wilmer Truck Alignment and Trailer Repair Prices
These are our standard on-site prices, so you know the cost before we arrive. Some lines add parts on top, and every extra repair gets quoted before we begin.
- 3-axle alignment, heavy duty$325
- 2-axle alignment, medium duty$250
- Heavy-duty spindlesFrom $1,388
- Spider plates$888
- Axle eye boring and sleeving$599–$999
- Spring pin bushings, per axle$752 + parts
- DOT inspection$188
- Steering wheel centeringFrom $47
Recent jobs
Recent Truck Repair Jobs in Wilmer
Jobs our techs finished in Wilmer, with photos and the work we did. Locations are approximate to protect our clients.
Wilmer Truck Alignment Questions
Can you square trailer axles at our DC?
Yes, we do trailer alignments in the yard, as long as the DC gives us the green light and there is a flat spot to work. So the trailer does not need to leave the property.
Which I-45 exits do you cover in Wilmer?
We cover all of them, including yards off Exit 269 at Mars Road, Exit 270 at Belt Line Road, and Exit 271 at Pleasant Run Road, plus the parks on both sides of I-45.
If a trailer spindle is damaged, do we need a tow?
No, we replace trailer axle spindles on-site for $1,388. So the trailer stays in your yard and goes back to work sooner.
Do you inspect the trailer before aligning it?
Yes. The trailer gets the same 30 to 50+ point check as a tractor, from the spindles to the tires. If we find worn bushings or a bent part, we quote it before doing any added work.
Book Truck Alignment in Wilmer
Let us know the park, the dock, and how many units need work, and we will line up a time.
