Grand Prairie Truck and Trailer Alignment, On-Site

Need a truck alignment in Grand Prairie without a trip to a shop? Instead of towing, Axle Tuners drives out with laser-guided equipment and sets up next to the truck. We align Class 5 to 8 trucks and trailers, and we inspect the front end while we are there.

Grand Prairie, TX · I-20, I-30 & SH 161
Grand Prairie freight

Grand Prairie Truck Alignment in the Great Southwest District

The city sits between Dallas and Fort Worth, and its east edge is only about 12 miles from downtown Dallas. I-20 runs through the south part of the city, while I-30 crosses the north. Meanwhile, SH 161 and the President George Bush Turnpike run north and south.

Much of the Great Southwest Industrial District also lies inside Grand Prairie. Angus Wynne started it in 1956, and Union Pacific still serves it on the old Great Southwest Railroad line. The district keeps drawing warehouse, distribution, and manufacturing projects, thanks to DFW Airport, rail, and interstate access, says the City of Grand Prairie.

Grand Prairie also builds things. For example, Lockheed Martin Missiles and Fire Control is the largest employer, with about 5,000 jobs. Airbus Helicopters, Inc. also has its headquarters here. In addition, plants such as Poly-America, Flex-N-Gate, and Lear Seating add steady truck traffic.

Alignment clamp mounted on a steer wheel during a truck alignment

Plant Traffic Is Hard on Front Ends

Plant and warehouse work mostly means short runs, tight docks, and lots of turning. As a result, each curb and pothole can nudge a front end out of spec. Then the steer tires scrub sideways, and the fuel bill climbs. In contrast, a truck in spec rolls straight and wears its tread evenly.

That is why tire wear matters so much. After all, a bad front end eats tread long before its time, and a truck that drags burns more diesel. Meanwhile, a heavy-duty alignment sets every angle back to spec. So an alignment check is one of the cheapest ways to protect your tires.

So every visit starts with a 30 to 50+ point check of the steering, suspension, tires, and axles. If a kingpin is loose or a spring pin bushing is worn, we show you, quote it, and fix it once you approve. Also, a tire shop without a rack can pass its alignment jobs to us.

Plain pricing

Grand Prairie Truck Alignment Prices

Here is what common jobs cost at your Grand Prairie location. Every item opens a page with more detail, and parts are billed only where marked. Also, the full inspection comes with each alignment.

Recent jobs

Recent Truck Repair Jobs in Grand Prairie

Jobs our techs finished in Grand Prairie, with photos and the work we did. Locations are approximate to protect our clients.

More Cities Near Grand Prairie

Grand Prairie borders Dallas, Arlington, Irving, and Fort Worth, so we work in all four. The rest are on our service area page.

Grand Prairie Truck Alignment FAQ

Yes, we work at carrier yards, warehouses, and fleet lots across the district, provided the property manager is fine with on-site repairs.

Yes. Park it at a yard, shop, or fleet lot near I-20, and we will bring the equipment to it.

Yes, a tie-rod or tie-rod end is $188 plus parts. We quote it after the inspection, so it can usually be replaced on the same visit once you approve.

For a heavy truck on three axles, the price is $325. That covers the laser alignment plus the full front-end inspection.

Yes. We set the trailer axles square, so the trailer stops scrubbing tires and follows the tractor’s line.

Call for Truck Alignment in Grand Prairie

Have the yard address and truck count handy when you call. That way, we can book a slot that fits your shifts.